Toggle right Slidebar



GLOWSHIFT WHITE 7 COLOR Fuel Pressure Gauge (0-30 PSI)

$84.99  $83.29
Save: 2% off

AVERAGE RATING OF 0 0 of 5 Stars!

GlowShift's White 7 Color Series 30 PSI Fuel Pressure Gauge is perfect for any diesel truck that is running lower fuel pressure levels. This diesel fuel pressure gauge ensures your truck's fuel system is running at its peak, and the pressure is not too low which could result in damage to your fuel pump, injectors, and a loss of overall horsepower. This 30 PSI fuel pressure gauge has been updated to include a 1/8-27 NPT electronic 30 PSI fuel pressure sensor allowing it to be installed directly to your fuel system with the included 9' sensor harness. This new sensor is twice as small as the previous model and offers extremely accurate readings directly from the source. Featuring an illuminated red needle that sweeps 270 degrees and is powered by stepper motor technology, this gauge offers smooth needle movement and extremely accurate readings. This fuel pressure gauge also features a magnified lens and 7 color through dial LED lighting that lets you match your factory dash lights or add a custom look to your interior. GlowShift's 7 color through dial LED lighting system allows the user to easily cycle through 7 solid color modes, along with 2 color cycle modes, and for easier night driving the LEDs can be dimmed 30% when connected to your factory headlight switch. With the included color memory recall feature you don't need to worry about adjusting the color of your gauge every time you turn your vehicle. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.

Note: This gauge includes a 1/8-27 NPT thread size on the sensor and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for the installation of the sensor. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.

If the 9' pressure sensor harness that comes included with the gauge is not long enough for your specific application, GlowShift offers an Extended Length Pressure Gauge Sensor Harness that features lengths of 18' for trucks with aftermarket lift pumps located at the rear of the truck and 40' for larger vehicles such as RVs. This sensor harness effortlessly snaps into the 1/8-27 NPT sensor and to the back of the fuel pressure gauge.

Dodge Cummins Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2012 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

GM Duramax Note: If you are installing this gauge to a GM Duramax engine, an aftermarket lift pump is required for this gauge to function properly.

2-1/16" (52mm) White Face Gauge with a Magnified Lens
Fuel Pressure Reading from 0 to 30 PSI
Electronic Fuel Pressure Sensor with 1/8-27 NPT Male Threads
9' Sensor Harness
7 Color LED Through Dial Lighting with Color Recall Ability
7 Solid Color Settings and Two Color Cycle Modes
Dimmer Wire Allows the Gauge to Dim 30%
Stepper Motor Technology
Gauge Depth Measures 1-5/16"
Gauge Visor
Mounting Hardware
Installation Instructions
Free Lifetime Technical Support
One Year Limited Warranty

Add to Cart:

  • PART NUMBER: GS-W711-30

ask a question
price match

we added this on Friday 14 September, 2018.


copyright © 2003-2019 COLORADOSPEED. powered by hORSEPOWER & tORQUE