Meziere 100 Series Electric Water Pump, Blue, Standard (GM LS1)

Features:

Designed for race engines, the WP119 has found a home on LS1 powered sand buggies because of it's light weight and durable construction.

• Fully polished or anodized in your choice of four colorsBlack,Blue,Red, Natural).
• All stainless steel hardware included.
• Fully CNC machined one piece main body.
• The complete standard LS-1 unit weighs only 7 pounds!
• This pump flows 35 GPM. Heavy-duty version flows 40+.
• For race and custom engines. Street applications Use WP319

Completing the Pump:
Pump is supplied complete with stainless hardware but without the inlet fitting. The fitting needs to be ordered according to the size of the lower radiator hose. (Rubber hose and AN sizes available).

Inlet Configurations:
The LS-1 pump body is ported for the lower radiator hose to come from the passenger side. The inlet adapters available are 1¼, 1½, 1¾, #12AN, #16AN, and #20AN. The outlet adapters available are 1¼, 1½, 1¾, #12AN, #16AN, and #20AN. The outlet adapter is 1 1/4 and is included.

Amperage draw:
Under normal use the pump will draw 6-7 amps.

Overall Height Dimension:
The standard pump is 7.8" long from the mounting surface to the tip of the pump. The heavy duty motor option adds .5" to the overall length.

Pump Weight:
This application weighs 7.0 lbs.

16 volt systems:
When purchasing a pump for a 16 volt system we recommend the 16 volt optional motor on our pump. The 12 volt pump will work for limited use applications.

Additional Notes:
The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, Turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. For the LS-1 you may need to consider the remote system and block plates to achieve a 55 GPM system.