Toggle right Slidebar




DISCOUNTS FOR ALL ACTIVE AND VETERAN EDUCATORS FIREFIGHTERS LAW ENFORCEMENT MEDICAL MILITARY CALL CHAT EMAIL TEXT FOR MORE DETAILS MAY EXCLUDE CERTTAIN ITEMS AND SOME RESTRICTIONS APPLY

DELPHI Roller Hydraulic Valve Lifters (GM LS)

REVIEWS: 10
AVERAGE RATING OF 8 8 of 5 Stars!

Delphi Roller Hydraulic Valve Lifters (RHVL) are valve train components that convert the rotation of the cam shaft into linear motion. The roller provides minimal friction at the cam/lifter interface. Delphi RHVL automatically eliminate clearance between valve train components to provide an adjustment and a maintenance-free system. The key to the automatically adjusting system is a high pressure chamber and the control of engine oil out of, and into, the chamber. A plunger that resides in the lifter body has a precise clearance to the body, forming an annulus. When the plunger is loaded during valve lift, oil is expelled through the annulus. During valve lift, the plunger expels oil allowing the plunger to displace a small distance within the body. When the engine valve closes and the load is removed, the plunger spring and oil pressure keep the valve train components in contact. The plunger moves within the body to recover the distance that the plunger traveled during loading, plus or minus any changes that may have occurred. The check valve opens and refills the chamber. This process is repeated for every valve event providing continuous automatic adjustment.

Delphi's RHVL also feature a metered oil supply for lubrication of the engine overhead through the push rod. The metering valve is designed to minimize sensitivity to contamination.

Benefits
  • Anti-varnish design minimizes sensitivity to accumulation of dirt, gum and varnish
  • Chrome alloy ball check valve provides more precise valve opening and closing events
  • Hardened steel body and plunger minimize wear for life-of-engine service
  • Low-friction roller bearing helps maximize fuel economy
  • Roller surface is optimized to minimize the cost of cam lobe processing without loss of performance
  • Oil metering provides lubrication to push rod interfaces and other valve train components
  • Optimized dynamic performance design enables better control of the valve event at all engine speeds
  • Optimized to minimize occurrence of cold start noise with adequate oil supply
Typical Applications
Delphi Roller Hydraulic Valve Lifters are designed for all cam-in-block internal combustion engines. Two lengths are available to meet customer requirements for mass and packaging.

Performance Specifications (for both configurations)
  • Maximum engine operating speed 6,000+ rpm (typical)
  • Roller follower material High alloy bearing steel
  • Roller follower crown radius 585 mm
  • Roller follower diameter 17.775 mm
  • Recommended maximum Hertzian contact stress 1,900 MPa with steel cam
  • 1,650 MPa with austempered ductile iron cam
  • 1,550 MPa with nodular iron cam
  • Oil supply pressure 100-500 kPa (typical)
  • Body outside diameter 21.4 mm (standard)
Recommended RHVL bore diameter
  • Cast iron: 21.425 mm to 21.445 mm
  • Aluminum: 21.417 mm to 21.438 mm
  • Set of 16 lifters for LS-Series engines
  • Same lifter used in LS2 and LS7 P/N 17122490 (single lifter)


Made in USA


unavailable
  • Model: 25341990
  • FROM: Delphi Technologies

ask a question
price match


we added this on Tuesday 11 March, 2014.

copyright © 2003-2024 COLORADOSPEED. powered by hORSEPOWER & tORQUE