CRANE Cams "LSX" Hydraulic Roller Camshaft, 246/256 | .624/.624 | 118 LSA (GM LSX)

Pro Street and Drags, for modified 440+ cu.in. w/ prepared LS7, LS3, or L92 heads and valve train, rough idle, headers and aft cat exhaust required, 11.5+ compression ratio advised, computer upgrades required, auto trans w/3400-3800 stall converter and low ratio gearing required.

RPM POWER RANGE: 2900-7200
Degrees Duration @ .050" Intake/Exhaust: 246/256
Advertised Degrees Duration Intake/Exhaust: 303/313
Degrees Lobe Separation: 118
Open/Close @ .050" Camshaft Lift Intake/Exhaust: 3.5 64.5/62.5 11.5
Lash Hot Intake/Exhaust: .000/.000
Gross Lift Intake/Exhaust: .624/.624